Nail Gun

Some children are constantly breaking wooden boards (about 6 feet tall and an inch or so thick) of our guide. It is ongoing and we are constantly replacing the boards. We would like to buy a nail gun (hopefully cheap) that is versatile enough to use it and the light around the house (ie the establishment of cornice)

In addition, we have seen combo staple / nail guns online. Is it possible that this type of weapon could be used to fix the fence?

Overall, this type of gun should I buy and how much will it cost?

Thank you

Sorry to hear about vandals. could try a webcam remotely. See links below. They fell sharply in the price and type of activity you describe, would pay for themselves pretty quickly.

Jason and Max are right. The screws are your best bet for fencing. Especially if you are constantly replacing the boards. Use brass screws torx drive and you'll be able to reuse their bouquet w / o skinning. Perfect for your situation. Nails in the fence tend to get out. why you would live for the terraces, instead of nails.

If you want a gun for the establishment of the Crown, the new tool is the coolest pin nailer headless. See the third link.

vh65ah Hitachi (nail gun) and Hitachi EC12 (air compressor) verry expensive but do the job and will last long. If you try to go cheap, everything you do causes you to spend more money in the long term. What type of wood do you use? Flag

First you need a compressor to run most nail guns, the most expencive gas use and the two types of work involving the use of tools and deferred, one for a cornice is finish nailer and the other is a nail gun for 2 to 3.5 in the nails that you could rent a rental of premises, because they are 300 to 600 dollars plus the new compressors have both and built my own house that the cost was justified finish nailers are cheap around 100 or so, Porter Cable DEWALT names rather

You probably can not get a gun that do both and I recommend you rent, because they are so expensive. The nails of the barrier must be much more important than what is usued for finish carpentry and all nail guns can take somewhat different lengths, different sizes and lengths does not significantly in the same gun.

I prefer to use an electric drill and use screws to close the slats? rent the gun to mold and use a laptop (battery) op drilling on the fence, if possible?

I would use screws, but getting a nail gun in a position to use a nail 2 inches.